Tuesday, June 30, 2020

Mercedes Benz Truck GLK 350 (204.956) V6-3.5L (272.991) Manufacturer Code Page 1175

Mercedes Benz Truck GLK 350 (204.956) V6-3.5L (272.991) Manufacturer Code Page 1175

- X30/5 (Left voltage distributor (CAN) connector)

- Test connectors and wiring for CAN of engine compartment CAN control modules.

- Control unit

Communication with ECU required ( Measuring system )

1.1.3.4. Display CAN signals with the aid of the special tool 'Star Diagnosis CANtool'.

Important notes

- When CAN diagnosis is finished, the 8-pin CAN cable must be replaced with the diagnostic cable.

- Before values are read out from a control unit, the control unit must be reinitialized.

Continue with button F2

Test 1.1.3.4.1: Actual values via CAN ( Engine CAN bus )

1.1.3.4.1. Actual values via CAN ( Engine CAN bus )

Note

- The actual values shown on the following screens are only displayed and updated as long as the CAN bus is active.

Continue with button F2

Test 1.1.3.4.1.1: Function-specific actual values :

Test 1.1.3.4.1.2: Cruise control

Test 1.1.3.4.1.3: Drive authorization

Test 1.1.3.4.1.4: Control unit-specific actual values :

Test 1.1.3.4.1.5: Electronic selector module

Test 1.1.3.4.1.6: Transmission control

Test 1.1.3.4.1.7: Motor electronics

Test 1.1.3.4.1.8: Steering column module

1.1.3.4.1.1. Function-specific actual values :

1.1.3.4.1.1. No further information available.

1.1.3.4.1.2. Cruise control

Warning!Communication with ECU required.

1.1.3.4.1.3. Drive authorization

Warning!Communication with ECU required.

1.1.3.4.1.4. Control unit-specific actual values :

1.1.3.4.1.4. No further information available.

1.1.3.4.1.5. Electronic selector module

Warning!Communication with ECU required.

1.1.3.4.1.6. Transmission control

Warning!Communication with ECU required.

1.1.3.4.1.7. Motor electronics

Warning!Communication with ECU required.